Skip to content
To take full advantage of this site, please enable your browser's JavaScript feature.
Learn how
Close Menu
Search:
Menu
My Cart (
Items )
Home
About Us
View Cart
My Account
Help/FAQ
Contact Us
Performance Parts
Diablo DCX Tuning
SCT Bully Dog Tuning
Package Kits
Dyno Charts
Customer Rides
YouTube Channel
Clearance Specials
Home
>
3.6L V6 Pentastar Ported Throttle Body
Alternative Views:
Our Price:
$
999.00
Product Code:
MM36-PENT
Description
Technical Specs
Designed for the 3.6L V6 Pentastar Engines!
This 80mm ported throttle body will increase HP and better acceleration on your 2011-2018
Here are basic install instructions that may need modified depending on the air intake you have.
1. Remove the engine cover and set aside. Unscrew the fastener at the throttle body to loosen the intake hose from the throttle body. There is no need to remove the accordion piece attached to the air box. It will bend up and out of the way. Just loosen from the throttle body, pull up on the resonator gently and move the resonator and hose in one piece over to one side.
2. Unhook the throttle sensor and set aside.
3. Unbolt the four screws from around the throttle body. Be careful of the rubber gasket that is secured to the intake. The gasket should remain attached to the intake. If it doesn't it is easily replaced, just push it back into the groove on the intake body.
4. Replace throttle body with new, align with the gasket seat against the intake and replace the top screw first, then bottom and sides, finger tighten each one. Remember those screws are metal going into a plastic intake housing. This must be done by hand as much as possible and do not force.
5. Tighten each bolt in a star pattern. DO NOT OVER TIGHTEN. Once it is snug no more than a half a turn more should do it.
5. Replace the intake hose on the throttle body. There is a notch on the seat of the throttle body and the intake hose should line up flush with it. Hand tighten the clamp until secure. Align the bottom of the resonator rubber grommet over the metal seat and push down gently but firmly. Replace engine cover.
Features
Dodge Challenger
Charger
Avenger
Journey
Durango
Caravan
Chrysler 200-300
Town and Country
Jeep Grand Cherokee
Wrangler J/K
Share your knowledge of this product with other customers...
Be the first to write a review