SCT DCX Custom tune only - Stage 2

If you have a 3200 X3 tuner and need custom tuning for turbo or Supercharger. Stage 2 is also needed for open loop tuning. Verify your supported vehicle in the Technical Specs

* Verify PCM p/n before ordering

The SCT 3200 xcal 3 will store multiple Custom Tune files created by Hemifever Tuning, while storing the stock factory tune for easy restoration back to the stock configuration. Custom tuning is required if you have installed a turbo or supercharger. I'll work with you and email tunes to get your vehicle running its optimum in the current configuration. Once tuned, changes that you make which require additional tuning will be subject to additional tuning fees.Idle, timing, and fuel curves can be changed to remove rich engine lights or fix idle problems.With a 2 bar map sensor and large injectors, we can dial in your forced induction configuration.Response & Gas MileageFlashes PCM quickly & easily via OBDII diagnostic port!Retains Stock Program for easy restoration back to stock!Available for most 1996 - 2003 Dodge Gas Truck's and Hemi'sReads and clears engine codesAbility to tune with a 2 bar map sensor and larger injectors