SCT DCX Custom tune only - Stage 1

If you have a 3200 X3 or 7215 X4 tuner and need custom tuning for heads and/or cam installs. Hemifever Tuning supports 1996 through 2006 SCT supported vehicles. Verify your supported vehicle in the Technical Specs

* Verify PCM p/n before ordering *** NOTE ** Turbo or Supercharger requires Stage 2 Custom tuning. Stage 2 is also needed for open loop tuning

The SCT XCalibrator 2 or 3200 xcal 3 will store multiple Custom Tune files created by Hemifever Tuning, while storing the stock factory tune for easy restoration back to the stock configuration. Custom tuning is required if you have installed a cam or set of heads. I'll work with you and email tunes to get your vehicle running its optimum in the current configuration. Once tuned, changes that you make which require additional tuning will be subject to additional tuning fees.Idle, timing, and fuel curves can be changed to remove rich engine lights or fix idle problems.Response & Gas MileageFlashes PCM quickly & easily via OBDII diagnostic port!Retains Stock Program for easy restoration back to stock!Available for most 1996 - 2006 Dodge Gas Truck's and Hemi'sReads and clears engine codes